Plumbing Fittings & Supports

Hardware

Plumbing

Pipe Connectors

Pipe Adaptors & Bushings

Pipe Caps & Plugs

Plumbing Valves

Gaskets & O-Rings

Plumbing Pipe Clamps

FloPlast

Bosta

Plimat

Van de Lande

Hep2O

Mega

Gebo

Fränkische

Itap

Lasco

McAlpine

UNIDELTA

Cavaletto

Wavin

Everflow

Fernco

Grey Pneumatic

Jones Stephens

Sunex Tools

grey

Brown

White

black/blue

Black

Multi-coloured

Grey

black

Gray

Gold

Silver

Socket plugs are used to cap off one end of a drainage run.This fitting is used in conjunction with a ring seal socket.

Drainage Socket Plug - 160mm

Aluminium Socket AMS-E 16

Socket &#039;O&#039; ring replacement for Watermaster system Black Rubber Water tight seal

Watermaster Socket &#39;O&#39; Ring

The purpose of this 110mm soil socket plug is to cap off a section of the soil pipe system. It is often used as a temporary measure to protect a new section of pipe during construction works, but it can also be used to permanently cap off a pipe when a sanitary appliance (usually a WC) is removed. Access caps have a plain spigot end to enable them to be connected via push fit into the ring seal socket of another fitting or pipe as required.

FloPlast Ring Seal Soil Socket Plug - 110mm Black

EAN: 4013960106596 - manufacturer-number: 19910145 - Double socket Kabuflex 145 - 19910145

19910145 - Double Socket Kabuflex 145 19910145

The FloPlast 160mm Terracotta Underground Drainage Double Socket Coupling is used to form a push-fit joint between two lengths of 160mm underground drainage pipes. This product can also be used as a slip coupling by simple removing the centre stops in the middle of the product.

Double Socket Coupler 160Mm Underground 6D105

110mm socket plugs are pushed inside the ring seal of a socketed 110mm fitting to cap off the fitting.110mm plugs are often used as a temporary measure to protect the drainage installation from ther site works, but they can also be used as a permanent measure for capping off an unused section of drainage.Please note that vent pipes should never be capped as this will create pressure imbalances which will very quickly cause the drainage system to fail.

FloPlast Drainage Socket Plug - 110mm

110mm Socket Plug Black Aquaflow 110mm Socket Plug in Black

Aquaflow 110mm Socket Plug In Black

FloPlastUndergroundSingleSocket15Bend-110mm   IntroducingtheFloPlastSingleSocket15Bend,apartofourFloplastfittingsrange. ...

FloPlast Underground Single Socket 15 Bend - 110mm

This coupling is used to join two plain ended pipes together.It can also be used to connect a plain ended pipe to the plain end of another fitting.Whenever any connection is made to a fitting which incorporates a ring seal (push fit) connection, the pipe should always be chamfered and the seal lubricated with silicon lubricant prior to insertion into the fitting.Please watch our overview video below

Drainage Coupling Double Socket - 110mm

HTSafe is the successor to the HT. Thanks to many improvements, it can be used in all areas of building construction. HTSafe meets fire protection class B1 and is therefore considered flame retardant. HTSafe meets all sound insulation levels from I to III and is therefore applicable in detached houses, residential and business objects and hospitals. Approval is not required, as HTSafe is manufactured according to European standard DIN EN 1451-1. Thanks to the great success on the market, the manufacturer has now run out the standard HT and is now replaced by the naturally backward compatible H

Ostendorf K12982 Socket Plug, Gray, DN110

FloPlastUndergroundDrainSingleSocketCoupler-110mm   IntroducingtheFloPlastDrainSingleSocketCoupler,apartofourFloplastfittingsrange. ...

FloPlast Underground Drain Single Socket Coupler - 110mm

32mm Cost effective solvent weld waste solution

Floplast 32MM Double Socket White (WS07W)

This coupling is used to join two plain ended pipes together.It can also be used to connect a plain ended pipe to the plain end of another fitting.Whenever any connection is made to a fitting which incorporates a ring seal (push fit) connection, the pipe should always be chamfered and the seal lubricated with silicon lubricant prior to insertion into the fitting.This coupling can also be turned into a slip coupling. Slip couplings have no central stops, enabling them to be slid along the length of a drainage pipe.This is particularly useful for installations in a confined space, or for use whe

FloPlast Drainage Coupling Double Socket - 110mm

Fränkische Aluminium Socket AMS-E 25

* BS669-1 * For use with bayonet type cooker hose This product should only be installed by a Gas Safe registered engineer. Gas Bayonet Socket 1/2"

Gas Bayonet Socket 1/2"

110mm PVCu. Terracotta. Ring Seal Joints. Suitable for Gravity Drainage & Sewerage. Install to Depths of 10m., Weight: 0.77823178486 pounds, Manufacturer: FloPlast

FloPlast Single Socket Drainage Bend 30o

110mm Socket Plug Grey Aquaflow 110mm Socket Plug in Grey

Aquaflow 110mm Socket Plug In Grey

Our XtraFlo downpipe bends are used to change the angle of flow of the 110mm downpipe. The bend features a single ring seal push fit socket which connects directly to the 110mm pipe.For ease of installation we always recommend the use of SL40 silicon spray lubricant on all ring seal push fit joints.

FloPlast Industrial/ Xtraflo Downpipe Single Socket Bend - 92.5 Degree X 110mm Black

Our FloPlast underground drainage bends are available with either a single or a double socket. The sockets are a simple push fit design with a captive rubber seal that is housed inside a moulded recess.Drainage bends have a variety of used depending upon their angle. 87.5 degree bends are most commonly used vertically at the foot of a soil pipe or a rainwater pipe, whilst 45 degree bends are often used at the entry and exit points of an inspection chamber. 30 and 15 degree bends are generally used in the horizontal plane when a slight change of direction is required.We always recommend the use

FloPlast Drainage Bend Double Socket - 45 Degree X 110mm

FloPlast Industrial/ Xtraflo Downpipe Single Socket Bend - 135 Degree X 110mm Grey

FloPlast Drainage Bend Single Socket - 45 Degree X 110mm

This FloPlast 87.5° Terracotta Double socket 110mm Underground Drainage Bend is used for changing the direction of 110mm underground drainage systems.

Double Socket 87.5 Degree Bend 110Mm Underground D561

HTSafe is the successor to HT. Thanks to many improvements, it can be used in all areas of building construction. HTSafe meets the fire protection class B1 and is therefore considered flame ant. HTSafe meets all sound insulation levels from I to III and is therefore applicable in single-family homes, residential and business properties and hospitals. Approval is not required, as HTSafe is manufactured according to European standard DIN EN 1451-1. International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of prod

Category

Brands

Categories

Discounts

Price Range

Shops

Color

usb socket car dashboard

Filters